Fall arrest system
A personal fall arrest system (FAS) is a system designed to minimise injury if a worker should fall from a significant height and experience impact. The purpose of the system is not to stop the fall (that is the purpose of a fall restraint system or fall prevention system), but to limit the injuries that could happen to a worker as a result of the fall's impact.
Fall arrest systems can be permanently installed. They can be used during recurring height related tasks (such as window cleaning, gutter work or regularly scheduled maintenance).
This system is made up of components that may include a body harness, an anchor, a connector, a lanyard, a deceleration device and a lifeline.
These systems must be professionally installed and should be regularly inspected to ensure compliance with health and safety and CDM regulations (Construction Design and Management) regulations. These can be internal inspections carried out by the contractor, third party audits or external inspections by the Health and Safety Executive.
Fall arrest systems should be replaced when necessary. Training is required for proper usage.
Personal fall arrest systems are most commonly used in situations where a fall is possible and a collective restraint system or fall prevention system is not in place.
[edit] Related articles on Designing Buildings Wiki
- BS 7883.
- BS 7883 guide released.
- Collective restraint systems.
- Dynamic self-retracting lanyard.
- Fall prevention systems.
- FASET.
- Hoists.
- Injuries on construction sites.
- Personal fall protection system.
- Safety in high places.
- Safety systems for working at heights.
- Site safety.
- Work at height checklist for managers.
- Work at height regulations.
- Work at height.
- Working at height - our duty to prevent harm and protect each other.
- Working at height training.
[edit] External resources
- Health and Safety Executive, A technical guide to the selection and use of fall prevention and arrest equipment, 2005.
- Health and Safety Executive, Inspecting fall arrest equipment made from webbing or rope, 2009.
- Health and Safety Executive, The Construction (Design and Management) Regulations 2015, 2015.
Featured articles and news
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from constructuon and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
The increasing costs of repair and remediation
Highlighted by regulator of social housing, as acceleration plan continues.
Free topic guide on mould in buildings
The new TG 26/2024 published by BSRIA.
Greater control for LAs over private rental selective licensing
A brief explanation of changes with the NRLA response.
Practice costs for architectural technologists
Salary standards and working out what you’re worth.
The Health and Safety Executive at 50
And over 200 years of Operational Safety and Health.
Thermal imaging surveys a brief intro
Thermal Imaging of Buildings; a pocket guide BG 72/2017.
Internally insulating a historical building
An experimental DIY approach using mineral thermal lime plaster.
Tree species selection for green infrastructure: A guide for specifiers.
The future of the Grenfell Tower site
Principles, promises, recommendations and a decision expected in February 2025.